100G Network Traffic Capturing Filter and Packet Broker Optimize
Network Security of Traffic Flow
1. Product Background
The NetTAP® Network Packet Broker with Nework Traffic Analysis
Visibility to Optimize Your Network, it is network data
visualization control device developed by Chengdu Shuwei
Communication Co., Ltd.(short as: NetTAP®) is a comprehensive
product of the whole visual data collection, data unified
scheduling management, pretreatment and redistribution.Network
elements which can realize different location, different exchange
routing node link centralized collection of data receiving,
processing engine, through the analysis of the device's built-in
high-performance data will be collected original data accurate
identification, analysis, statistical summary and tag, the original
data redistribution output, monitoring equipment to meet all kinds
of analysis in data mining, protocol analysis, signal analysis,
security analysis, risk control, etc. The required flow rate.
2. Intelligent Traffic Processing Abilities
ASIC Chip Plus Multicore CPU
1.8Tbps intelligent traffic processing capabilities
100GE Data Acquisition & 100GE Packet Capturing
25GE * 48 ports plus 100GE * 6 ports, Max Rx/Tx duplex processing,
up to 1.8Tbps Traffic Data Transceiver at same time, for network
Data Acquisition, simple Pre-processing
Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N
ports aggregated, then replicated to multiple M ports
Data Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N
ports aggregated, then replicated to multiple M ports
Data Distribution & Packet Broker
Classified the incoming raw data accurately and discarded or
forwarded different data services to multiple interface outputs
according to the whitelist, blacklist or user’s predefined rules.
Data Filtering
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP,
DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and
value, IP protocol number, TOS, etc. also supported flexible
combination of up to 2000 filtering rules.
Load Balance
Supported load balance Hash algorithm and session-based weight
sharing algorithm according to L2-L7 layer characteristics to
ensure that the port output traffic dynamic of load balancing
UDF(User Defined Function) Match
Supported the matching of any key field in the first 128 bytes of a
packet. Customized the Offset Value and Key Field Length and
Content, and determining the traffic output policy according to the
user configuration
Single Fiber Rx/Tx
Supported the single fiber Rx/Tx based on ports 10G, 25G, 40G, 100G
working mode, to meet the requirement of single fiber data Rx/Tx in
back-end devices, and can reduce the access cost of optical fiber
materials for user to collect and distribute a large number of
links.
Network Message Disitribution & Packet Distribution
A message splitting method based on multiple hash is characterized
as follows: the method USES two hash algorithms to calculate two
hash results respectively, USES one of the hash results to search
the result of the spatial primary table as the benchmark index, and
USES the other hash result to search the result of the spatial
subtable as the auxiliary index to modify the benchmark index.
NetTAP® Visibility Platform
Supported NetTAP® Matrix-SDN Visual Control Platform Access
1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System
NT-FTAP-54ECX
Network TAP NPB.pdf
3. Typical Application
Data Center Of Area:
Telecom,
Broadcasting,
Government,
Finance,
Energy,
Power,
Petroleum,
Hospital,
School,
Enterprise
And Other Industries
NetTAP® Network Optimization Solution
- More application for 25G/50G/100G, bandwidth crazy growing
- Virtualized cloud computing drives both north-south and east-west
traffic growth
- Main applications based on B/S architecture, with higher
bandwidth requirements, more interaction open, and business changes
faster
- Network operation and maintenance: single network management -
network performance monitoring, network backtracking, anomaly
monitoring - AIOPS
- More security management and control, such as IDS, DB Audit,
Behavior Audit, Operation and Maintenance Audit, Data-oriented
Management and Control,
Virus Monitoring, WEB Protection, Compliance Analysis and Control
- Network Security – from Access control, Threat Detection and
Protection to the core of Data Security
4. Specifications
| NT-FTAP-54ECX NetTAP® Network Packet Broker Functional Parameters |
| Network Interface | 25GE(10GE) | 48*SFP+ slots |
| 100G(40G) | 6*QSFP28 slots |
| Out of Band management interface | 1*10/100/1000M electrical interface |
| Deployment mode | Optical Split | support |
| SPAN Mode | support |
| System Function | Traffic Processing | Traffic replication / aggregation / distribution | support |
| Load Balance | support |
| Diverting based on IP / protocol / port Five tuple traffic
identification | support |
| UDF Match | support |
| Single Fiber Rx/Tx | support |
| Ethernet encapsulation independence | support |
| Process Abilities | 1.8Tbps |
| Management | CONSOLE Network Management | support |
| IP/WEB network management | support |
| SNMP network management | support |
| TELNET/SSH network management | support |
| SYSLOG Protocol | support |
RADIUS or AAA Centralized authorization | support |
| User authentication function | Password authentication based on user name |
| Electric(1+1 Redundant Power System-RPS) | Rated supply voltage | AC110~240V/DC-48V(Optional) |
| Rated power frequency | AC-50HZ |
| Rated input current | AC-3A / DC-10A |
| Rated power function | Max 280W |
| Environment | Operating Temperature | 0－50℃ |
| Storage Temperature | -20-70℃ |
| Operating Humidity | 10%-95%, Non-condensing |
| User Configuration | Console Configuration | RS232 port,115200,8,N,1 |
| Password authentication | support |
| Rack Height | Rack space (U) | 1U 445mm*44mm*505mm |
*THE MORE ADVANCED FUNCTIONS WILL BE LAUNCHED SOON*
